LIGHT skylight protection system
LIGHT-ON-TOP
Translucent roof surfaces certainly provide light but, because they are difficult to recognise with increasing service life, they become a high fall-through risk for individuals. Here, LIGHT-ON-TOP provides optimum protection: The sophisticated variant of the proven LIGHT skylight protection system guarantees permanent fall-through protection for strip lights. The permanently installed net can be attached to trapezoidal sheeting and sandwich panels, and is a suitable solution for industrial roofs, for example. Installation from outside and above is quick and simple without opening the roof cladding. This design in turn allows simple inspection of the system’s integrity.
The basis of LIGHT-ON-TOP is a 2.5 mm thick steel wire core with a UV-resistant PVC-coating, in order to ensure long durability and weather resistance. The mesh dimensions are 60 x 60 mm, and this provides an optimum combination of safety and light permeability. The system was developed specially for use on trapezoidal sheeting and sandwich panel roofs (with a minimum material thickness of 0.5 mm for steel and 0.6 mm for aluminium). Fastening sets are used for installation, and these are optimally matched to the respective net dimensions.
Certified safety
The system is dynamically tested using 100 kg from a fall height of 1.2 metres. This corresponds to a fall energy of 1200 joules.
Simple to retrofit
LIGHT-ON-TOP can be easily retrofitted to existing light panels, without needing extensive structural modifications.
Three standard sizes
LIGHT-ON-TOP is available in three standard net widths (1500 mm, 1750 mm, 2000 mm), provided in 25 metre rolls. The net can be cut in situ, directly to the project-specific size. Other widths available upon request.
State of the art certification:
