Anchor points for anchor point and systems
SINGLE ANCHOR POINTS/POSTS
SINGLE ANCHOR POINTS/POSTS from INNOTECH are available in very varied models and designs. Depending on substructure and requirement, it is therefore possible to create an optimum solution. Its purpose is to safely dissipate the loads which occur into the substructure, in the event of a fall. For this, the ANCHOR POINTS from INNOTECH are always tested and certified for the respective substructure. A single anchorage is created in combination with an anchorage eye. Anchor points can also be used to attach systems (cable or rail systems) to many types of substructures.
- Can be used universally as a single anchor point or as a system post.
- For every substructure, the appropriate associated fastening equipment is also available.
- Variants for installation without roof penetration.
Arrange a non-binding consultation
Add to noteRemove from note
SINGLE ANCHOR POINTS/POSTS - Technical data
State of the art certification:
EN 795:2012 TYP A, B, C, D, E
CEN/TS 16415:2017
DIBT
Filter items
Items in this system
Components
EAP-LOCK-13
Single anchor point LOCK-13
The LOCK-13 single anchor point from INNOTECH with the detachable, rotating anchorage eye secures 2 people with personal protective equipment.
Accessory items
QUAD-11
Unipost QUAD-11
The QUAD-11 universal post from INNOTECH can be used as a single anchor point and also as a system post in the AIO lifeline system.
QUAD-13
Unipost QUAD-13
The QUAD-13 universal post from INNOTECH can be used as a single anchor point and also as a system post in the AIO lifeline system.
QUAD-30-300
Post for green roof EAP-QUAD-30-300
System post held by superimposed load for rail system and anchorage point on green and gravel roofs.
EAP-SPAR-11-125
Single anchor point SPAR-11-125
Single anchor point SPAR-11-125 from INNOTECH.
EAP-INDUSTRY-11
Single anchor point INDUSTRY-11
Crimped clamp INDUSTRY-11 from INNOTECH for metal roof systems.
EAP-INDUSTRY-31
Single anchor point INDUSTRY-31
The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.
SDH-INDUSTRY-31
Safety roof hook INDUSTRY-31
The SDH-INDUSTRY-31 safety roof hook from INNOTECH is characterised by its especially high intrinsic stability and variable support on all crimp heights.
SZH-INDUSTRY-31
Intermediate cable bracket SZH-INDUSTRY-31 for l
The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.
EAP-INDUSTRY-31-CU
Single anchor point INDUSTRY-31-CU
The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.
SZH-INDUSTRY-31-CU
Intermediate cable bracket SZH-INDUSTRY-31-CU fo
The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.
SDH-INDUSTRY-31-CU
Safety roof hook INDUSTRY-31-CU
The SDH-INDUSTRY-31-CU safety roof hook from INNOTECH is characterised by its especially high intrinsic stability and variable support on all crimp heights.
EAP-SLING-11
Single anchor point SLING-11
The EAP-SLING-11 single anchor point from INNOTECH blends optimally into the building aesthetics because of its discreet appearance.
SDA-35
STEEP ROOF ANCHORAGE POINT SDA-35
SDA-35 from INNOTECH is ideal as a single Anchorage point for sloped roofs and steep roofs.
EAP-ABP-10-30-A4
Single anchor point ABP-10-30-A4
Single anchor point/descender eye EAP-ABP-10-30-A4 from INNOTECH with rotating anchorage eye.
EAP-MOBI-TAPE-13
Single anchor point MOBI-TAPE-13
Single anchor point MOBI-TAPE-9 from INNOTECH for 1 person.
EAP-MOBI-TAPE-9
Single anchor point MOBI-TAPE-9
Single anchor point MOBI-TAPE-9 from INNOTECH for 1 person.
STA-16
End and corner post STA-16 for all systems
The STA-16 system post has a very high base stability and provides a multiplicity of implementation options on almost all substructures.
STA-10
Unipost STA-10 for all systems
The STA-10 system post has a very high base stability and provides a multiplicity of implementation options on almost all substructures.
STA-12
Unipost STA-12 for all systems
The STA-12 system post has a very high base stability and provides a multiplicity of implementation options on almost all substructures.
STA-11
End and corner post STA-11 for all systems
The STA-11 system post has a very high base stability and provides a multiplicity of implementation options on almost all substructures.
FALZ-25
FALZ-25 intermediate point for lifeline systems
The FALZ-25 intermediate point from INNOTECH was developed for installation on standing seam roofs in the AIO lifeline system.
SAND-31-A2
Anchorage point SAND-31-A2 for lifeline systems
End point, corner point, and intermediate point SAND-31-A2 for Peneder arch roof.
SAND-01-A2
Universal point SAND-01-A2
The SAND-01 from INNOTECH has a low system height, and can therefore be installed easily so that it is architecturally inconspicuous.
VARIO-45
Universalpoint VARIO-45 for all systems
The VARIO lifeline system from INNOTECH, held by superimposed load, is a winner especially because of its rapid and simple installation.
AIO-SYST-20
Universal point SYST-20
The SYST-20 anchorage point for trapezoidal sheeting from INNOTECH is used as an end or corner point in a horizontal lifeline system, and also as an intermediate bracket.
BKS-GP-01
Base plate BKS-GP-01 for post in the lifeline sy
Using the BKS assembly kit post from INNOTECH, only a stop shaft is required for securing all further components in the horizontal lifeline system.
BKS-AW-01
Stop shaft BKS-AW-01 in the lifeline system
Using the BKS assembly kit post from INNOTECH, only a stop shaft is required for securing all further components in the horizontal lifeline system.
