Your Opinion Counts!

Customer satisfaction is our highest priority, so we would like to invite you to take part in our customer survey.
Please take a moment to help us improve our processes and services.

Click here for the survey

2006: 3504-PF

Guardrail system


Guardrail system for escape routes

The BARRIER ESCAPE ROUTE guardrail system is used wherever a prescribed route out of the danger zone has to be created so that persons can leave it safely. Regardless whether it is a case of straight runs, or whether corner layouts must be created, the guardrail system ensures optimum safety. Depending on the construction circumstances, the Vario escape route system and the concrete slab escape route system provide two guardrail system variants held by superimposed load. The BARRIER ESCAPE ROUTE guardrail system was designed to ensure simple installation.

  • Certified solution for implementing an escape route which complies with standards.
  • Vario escape route system provides individual setting of escape route width, depending on the number of persons escaping.
  • Space-saving concrete slab escape route system variant, using customer-supplied concrete slabs to provide superimposed load.
  • Simple to retrofit, because the system uses superimposed loads.
  Arrange a non-binding consultation
  Add to noteRemove from note


The guardrail system consisting of aluminium and stainless steel impresses because of its weather resistance and robustness.
The guardrail, together with the various individual components, such as the specially developed foot units, booms, posts, concrete weights, and the toe board, combine to create a harmonised system.
Depending on which system variant is used, there is the option of a space-saving or individually adjustable escape route width.


Escape route compliant with standards
If the necessary prerequisites are fulfilled, e.g. reduction of post separation to 1,7 m, a path width of at least 700 mm, and additional measures (such as fitting toe boards), the system can be used as a standards-compliant escape route.

Adjustable to individual requirements
With the Vario escape route system variant, there is the option of individually adapting the escape route width to the circumstances.

Space-saving system
The concrete slab escape route system has no booms or concrete weights on the outside of the escape route instead, the existing concrete slabs of the path serve as the superimposed load. This therefore represents a space-saving alternative. Our standard path widths are 1450 mm, 1650 mm, and 1950 mm, but an individual adaptation is possible on request.

State of the art certification:

DIN 14094-2:2017


Filter items
Items in this system

1 components available for BARRIER-ESCAPE-ROUTE



Rating plate BARRIER-Z11 for guardrail system

The BARRIER guardrail system from INNOTECH provides many different application options in collective side protection.


Vario weight BARRIER-V20

Vario weight.


Standard boom BARRIER-S22-1300

Standard boom.


Vario foot unit BARRIER-V12

Vario foot unit for guardrail system.



Vario foot unit BARRIER-V14

Vario foot unit for guardrail system.


Vario corner tie BARRIER-V92

Corner tie.


Toe board BARRIER-F20

Toe board for guardrail system.


Toe board bracket BARRIER-F22

Toe board bracket for fastening to the VARIO foot unit.


Toe board connection set BARRIER-F23

Toe board connection set.


Toe board bracket BARRIER-F25

Toe board bracket for fastening to the VARIO foot unit.


Standard post BARRIER-S20-1140

Standard post VARIO, straight, permanent


Aluminium pipe BARRIER-R11

Aluminium pipe.


Linear tie BARRIER-R21

Linear tie.


Corner tie BARRIER-R31

Corner tie.


Wall tie BARRIER-R41

Wall tie.


End seal BARRIER-R51

End seal.


End cap BARRIER-R91

End cap for aluminium pipe.


Door set BARRIER-T30

Door set.


Footway rail BARRIER-Z50-3000

Footway rail for emergency escape route.

Accessory items


Underlay mat Z33-500

Underlay mat for VARIO weight.