Detailed search

Search our complete product catalog via full text search or filtering

The AIO LIFELINE SYSTEM PASSABLE is used wherever a horizontal surface must be protected. Regardless whether along roofs, facades, in industry or for photovoltaic systems, it provides optimum protection against falls from a height.Neither ...

The AIO LIFELINE SYSTEM NON-PASSABLE i is used wherever a horizontal surface must be protected. Regardless whether along roofs, facades, or in industry, it provides optimum protection against falls. Not only does it adapt to complex building ...

The AIO LIFELINE SYSTEM NON-PASSABLE, FACADE is a fall protection system which is used along facades, walls, and parapets. The protection of complex facade structures represents no problem for the system. The system components, specially ...

The AIO-PASSABLE-FACADE lifeline system is a fall protection system which is deployed on facades, walls, and parapets. The protection of complex facade structures presents no problem to the lifeline system. Thanks to the fasteners specially ...

The AIO PASSABLE OVERHEAD LIFELINE SYSTEM is deployed wherever a horizontal overhead must be protected. Regardless whether along a maintenance walkway or in the area of machine safeguarding, the lifeline system can be relied upon to protect ...

The BARRIER-FLEECE guardrail system is used wherever fall edges on flat roofs with a pitch (inclination) of up to 10° need to be secured. It forms a barrier to the fall edge, allowing all persons on the roof to move around safely. This system ...

The BARRIER-ASCENT-LADDER guardrail system is used wherever it is necessary to secure the exit area of an ascent ladder, where a fall edge is present after exiting onto the roof surface. Depending on the substructure (parapet) ...

The BARRIER ATTIKA guardrail system is suitable only for combination with an existing parapet construction. Once the system has been attached to the parapet construction, it provides optimum fall protection for all persons located ...

The BARRIER-ESCAPE guardrail system is used wherever a prescribed route out of the danger zone has to be created so that persons can leave it safely. Regardless whether it is a case of straight runs, or whether corner layouts must ...

The BARRIER-MACHINE-SAFEGUARDING guardrail system is used wherever fall edges on machinery or in an industrial environment have to be secured. The guardrail system is so flexible that it is possible to individually solve the ...

The BARRIER SKYLIGHT guardrail system is used wherever skylights must be protected on roofs of up to 10° inclination. Regardless of the size of the skylight, the superimposed load system provides optimum fall protection, and thereby ...

The BARRIER-SYST guardrail system is the ideal solution for securing metal profile roofs up to an inclination of 10° (e.g. industrial buildings, storage halls, etc.). It provides reliable fall protection without requiring roof penetration. ...

The BARRIER-VARIO guardrail system is used wherever the fall edges of a flat roof up to a maximum pitch of 10° must be protected. The guardrail held in place by superimposed concrete weights creates a barrier around the fall-risk area, and ...

The mobile skylight fall protection device EAP-MOBI from INNOTECH can be used as fall protection or as a single anchor point for one person. It ensures ideal safety, especially during evacuation or maintenance work, and is extremely ...

The IND LIFELINE SYSTEM was specially developed for use in industry, and it can be used wherever a straight horizontal run up to an inclination of 10 % has to be protected. It can be attached temporarily or permanently to various ...

The KIT BOX SYSTEM is ideally suited for construction sites and building projects. It can be used wherever it is necessary to protect horizontal movement.It is a non- passable system with a maximum total system length of 30 m. It provides ...

The LIGHT skylight protection system, consisting of a sturdy steel mesh basket, offers visually appealing protection against falls for all persons in the danger zone of lighting elements. The custom-made production of the LIGHT ...

The LIGHT-FLEX-SKYLIGHT PROTECTION NET from INNOTECH is a flexible and robust safety solution for a wide variety of skylight dome types, especially for longer lighting elements such as strip lights. Thanks to its net design, ...

Translucent roof surfaces certainly provide light but, because they are difficult to recognise with increasing service life, they become a high fall-through risk for individuals. Here, LIGHT-ON-TOP provides optimum protection: The sophisticated ...

LIMIT is used wherever a visually recognisable barrier must be provided for a danger area. The system is particularly suitable for drawing attention to danger sources in locations at height. The barrier is quick to install and is ...

The MFS modular fall prevention system for windows is used wherever a fall risk exists at open windows or wall openings. Regardless whether for standard windows, windows with demanding dimensions, wall openings, or windows in listed buildings, ...

PPE ASSOCIATED EQUIPMENT from INNOTECH is the ideal addition to the INNOTECH harness models. Their purpose is to extend the use of the harnesses in their respective applications, and they provide practical solutions for cable access ...

PPE LANYARDS are the secure connection to INNOTECH anchor points. There are a number of variations which fulfil the respective requirements in terms of operation and loading.

Intuitive use, optimum comfort, top quality: Just some of the characteristics of our anti-fall harness systems. The PPE STRING harness system is available in ...

The SAFETY ROOF HOOKS can be used simultaneously as a single anchor point for personal protective equipment, and for fastening a roof ladder. It is possible to match the colour of the SAFETY ROOF HOOKS to the roof covering. They are available ...

SINGLE ANCHOR POINT/POSTS SET ITEMS from INNOTECH are available in very varied models and designs, and they contain all products necessary for secure fastening to the substructure. Depending on substructure and requirement, it is ...

SINGLE ANCHOR POINTS/POSTS from INNOTECH are available in very varied models and designs. Depending on substructure and requirement, it is therefore possible to create an optimum solution. Its purpose is to safely dissipate the loads which ...

The TAURUS ALLROUND rail system combines the application range and benefits of TAURUS HORIZONTAL and VERTICAL in the form of a flowing transition between horizontal and vertical movement. Regardless whether industrial buildings, ...

The TAURUS HORIZONTAL rail system is used wherever movements along a horizontally running pathway need to be protected from a fall risk. Regardless whether along roofs, facades, for overhead use, in industry or in connection with ...

The TAURUS VERTICAL rail system is used wherever vertical ascents and descents require protection. Regardless whether ladder access, shelving/mast systems (with or without ladder), steel constructions with access systems, or as a means for ...

The TEMP rope lifeline system from INNOTECH is used wherever a horizontal surface needs to be secured against fall (from a height) at short notice. This can be applied on construction sites or in industrial buildings with a wide ...

The VERT LIFELINE SYSTEM is used wherever vertical ascents or descents require protection. Regardless whether ladder access, shelving/mast systems (with or without ladder) or steel constructions with access systems, it provides ...

Abdichtmanschette für POINT und QUAD.

Abdichtmanschette für POINT und QUAD.

Abdichtmanschette für STA-10/-11/-12/-16.

Abdichtmanschette für STA-10/-11/-12/-16.W:

End lock fastening for horizontal rope systems.

End lock fastening for façade lifeline systems

End lock fastening for façade rope systems

End lock fastening for horizontal lifeline systems

Curve element from INNOTECH for a passable lifeline system.

Curve element from INNOTECH for a passable lifeline system.

Curve element from INNOTECH for a passable lifeline system.

Curve element from INNOTECH for a non-passable lifeline system.

Curve element from INNOTECH for a non-passable lifeline system.

Extension tube from INNOTECH for a passable curve element.

Verlängerungsrohr 90° von INNOTECH für das überfahrbare Kurvenelement.

Corner pass-through element from INNOTECH for a passable lifeline system.

Corner pass-through element from INNOTECH for a passable lifeline system.

Corner pass-through element, variable up to 135°, from INNOTECH, for a passable lifeline system.

Corner pass-through element, 90°, from INNOTECH for a passable lifeline system.

Corner pass-through element, 90°, from INNOTECH for a passable lifeline system.

Corner pass-through element, 90°, from INNOTECH for a passable lifeline system.

Variable pipe bend 80°, 105°or 120° from INNOTECH for the passable curve element AIO-EDLE-50.

The AIO-EDLE-51 is a specially developed, damped corner element for rope systems in the field of fall prevention (protection) system.
It allows multiple curves to be created within a single system without the need for additional shock ...

The ALLinONE end lock set from INNOTECH® has been developed as a complete set, with integrated shock force absorption and fall indicator clamp.

The ALLinONE lifeline system from INNOTECH has been developed as a restraint system, fall arrest system, and rescue system.

The ALLinONE lifeline system from INNOTECH has been developed as a restraint system, fall arrest system, and rescue system.

The ALLinONE slider from INNOTECH® is characterised by a resistance-free passage along the stainless steel cable.It is used as a mobile anchorage point for 1 person.

The ALLinONE slider from INNOTECH® is characterised by a resistance-free passage along the stainless steel cable. It is used as a mobile anchorage point for 1 person.

The ALLinONE slider from INNOTECH® is characterised by a resistance-free passage along the stainless steel cable. It is used as a mobile anchorage point for 1 person.

The AIO-GLEIT-22 from INNOTECH can be both attached and detached at any location on the lifeline system. It makes movement possible on curves as well as straight runs along the lifeline system. It was developed specially for performing overhead ...

Stainless steel cable tested for INNOTECH lifeline systems.

Stopschild für Horizontal Seilsysteme

Intermediate bracket, passable, for horizontal lifeline systems

Intermediate bracket for façade lifeline systems.

Intermediate bracket for non-passable lifeline systems.

Rating plate for lifeline systems, passable.

Rating plate for lifeline systems, passable as per DIBt.

Rating plate for lifeline systems, passable, superimposed load.

Rating plate for lifeline systems, not passable.

Rating plate for lifeline systems, not passable, superimposed load.

Typenschild für nicht überfahrbare Seilsysteme nach DIBt.

Because of the very wide variety in fall-risk areas, individual forms of fall protection are necessary. However, to be protected against a fall, the core of the solution is always a secure connection between user, PPE, and an anchorage device. A ...

Adapter on the side of the parapet.

Adapter on the inside of the parapet, hinged.

Adapter directly under the parapet cover.

Adapter for attachment to the top of the parapet.

Spacer bracket for parapet guardrail system.

The basic package for securing one side of the exit area of a fixed ladder.

Extension package for the BARRIER-ASCENT-LADDER-BASIC-PACKAGE to produce a toe board.

Adapter for STA post.

Toe board for guardrail system.

Toe board bracket for fastening the toe board to the post.

Toe board bracket for fastening to the VARIO foot unit.

Toe board connection set.

Dehnungsausgleich.

Toe board bracket for fastening to the VARIO foot unit.

Corner connector.

Aluminium pipe.

Linear tie.

Expansion compensation.

Corner tie.

Wall tie.

End seal.

Pipe bracket.

End cap for aluminium pipe.

Standard post VARIO, straight, permanent

Standard post, parapet, straight, permanent.

Standard boom.

Standard boom, superimposed load.

Standard boom, corner formation.

Standard boom.

Stiffening strut.

Foldable post.

Curved post.

BARRIER CLAMP for profile roofs.

BARRIER CLAMP for profile roofs.

BARRIER CLAMP for profile roofs.

Door set.

75 degree installation set for door set BARRIER-T30.

Vario foot unit for guardrail system.

Vario foot unit for guardrail system.

Vario Fusseinheit für Geländersicherung.

Vario weight.

Adapter.

Corner tie.

The BARRIER guardrail system from INNOTECH provides many different application options in collective side protection.

Abdeckkappe.

Flame scarf angle for guardrail system.

Underlay mat for Vario weight on plastic and bitumen seals.

Footway rail for emergency escape route.

Klemme für Fangstange.

Bore fastener.

Fastening set on concrete (min. C20/25) - non-cracked.

Fastening set on concrete/hollow concrete slab.

Fastening set for concrete.

Fastening set for concrete.

Fastening set, hollow concrete slab.

Fastening set for concrete.

Fastening set on wooden rafter (min. 16 x 16 cm).

Fastening set on wooden rafter (min. 8 x 10 cm).

Fastening set on wooden rafter.

Fastening set on wood - sandwich construction.

Fastening set on wooden rafter for ridge installation.

Fastening set on wood - wooden rafter.

Fastening set for wood - wooden rafters.

Fastening set on wooden formwork.

Fastening set on solid wood ceilings.

Fastening set on wood/OSB - wooden formwork.

Fastening frame, trapezoidal supporting sheet.

Quick fastening bracket for BEF-303, trapezoidal supporting sheet.

Special toggle fastener for BEF-303, trapezoidal supporting sheet.

Fastening set on OSB board / trapezoidal supporting sheet.

Stabilising ledge, trapezoidal supporting sheet.

Adapter strip for QUAD-13 on trapezoidal supporting sheet.

Fastening set for STA-10 / STA-11 / STA-16 on steel UK.

Fastening for trapezoidal sheet.

Counter plate for STA-10 and SPAR-11.

Counter plate for STA-12

Counter plate for STA-17.

Anchorage point for all systems and single anchor point.

Clamping console, steel construction.

Guide pulley, steel constructions.

Universal fastener, trapezoidal supporting sheet.

Special toggle fastener, trapezoidal supporting sheet.

Fastening set for green roof.

The BEF-810 fastening set from INNOTECH is characterised by high inherent stability. The variable adjustment options for the various clamps guarantee high flexibility.

Adapter bracket for corner passage elements.

The BEF-811 fastening set from INNOTECH is characterised by its especially high intrinsic stability. The variable adjustment options for the various clamps guarantee high stability.

The BEF-830-01 fastening set from INNOTECH is characterised by high inherent stability. The variable adjustment options guarantee high flexibility.

The BEF-830-02 fastening set from INNOTECH is characterised by high inherent stability. The variable adjustment options guarantee high flexibility.

The BEF-830-03 fastening set from INNOTECH is characterised by its especially high intrinsic stability. The variable adjustment options guarantee high stability.

The BEF-830-04 fastening set from INNOTECH is characterised by its especially high intrinsic stability. The variable adjustment options guarantee high stability.

The BEF-830-05 fastening set from INNOTECH is characterised by its especially high intrinsic stability. The variable adjustment options guarantee high stability.

The BEF-840 fastening set from INNOTECH is characterised by high inherent stability. The variable adjustment options for the various clamps guarantee high flexibility.

The BEF-841 fastening set from INNOTECH is characterised by its especially high intrinsic stability. The variable adjustment options for the various clamps guarantee high stability.

Fastening set for VERT-SET-80

Fastening set for VERT-SET-80

Fastening set for VERT-SET-80

Fastening set for VERT-SET-80.

Fastening set for VERT-SET-80.

Fastening set for VERT-SET-80.

Grundvoraussetzung für die Verwendung des BIA-SET-02 ist ein einsatzbereites BIA-SET-01. Bei diesem Zubehörartikel handelt es sich um eine optionale Verankerungauf STA-, SYST- oder FALZ-Stützen, welche die Installation von ...

Using the BKS assembly kit post from INNOTECH, only a stop shaft is required for securing all further components in the horizontal lifeline system.

Using the BKS assembly kit post from INNOTECH, only a stop shaft is required for securing all further components in the horizontal lifeline system.

Ein unerkannter Blitzeinschlag kann die Tragkraft von Seilsystemen zur Absturz- sicherung bis zu 50% schwächen - die Folge: Lebensgefahr! Mit dem gemeinsam mit der OÖ. Blitzschutzgesellschaft m.b.H. entwickelten BIA-SET können Schäden ...

Washer without chamfer.

Single anchor point including fastening set for concrete.

Single anchor point incl. fastening set on concrete.

Single anchor point incl. fastening set on solid wood.

Single anchor point incl. fastening set on wood - rafter (min. 16 x 16 cm).

Single anchor point incl. fastening set on OSB.

Single anchor point incl. fastening set on wood - rough formwork.

Single anchor point incl. fastening set on wood - rough formwork.

Single anchor point incl. fastening set on trapezoidal sheeting.

Single anchor point / abseiling eye EAP-ABP-10-30-A4 from INNOTECH with movable anchorage eye.

Crimped clamp INDUSTRY-11 from INNOTECH for metal roof systems.

Single anchor point EAP-INDUSTRY-19 for Peneder arch roof.

The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.

The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.

The LOCK-11 receptacle sleeve from INNOTECH is permanently attached to the masonry, and has a protective cap with which the single anchor point is suitably covered when not in use.

Replacement end cap for EAP-LOCK-11 in red or white.

The LOCK-13 single anchor point from INNOTECH with its removable, detachable anchorage eye secures two persons wearing personal protective equipment.

Scratch protection EAP-LOCK-14.

The MOBI mobile skylight fall-through protection from INNOTECH is used both as a fall-through protection system, and also as a single anchor point for one person.

Single anchor point MOBI-TAPE-9 from INNOTECH for 1 person.

Single anchor point MOBI-TAPE-9 from INNOTECH for 1 person.

Single anchor point EAP-POINT-11 from INNOTECH.

Single anchor point EAP-POINT-12 from INNOTECH.

The EAP-SLING-11 single anchor point from INNOTECH blends optimally into the building aesthetics because of its discreet appearance.

Single anchor point SPAR-11 from INNOTECH.

Single anchor point SPAR-11-125 from INNOTECH.

Single anchor point SPAR-11-35 from INNOTECH.

Single anchor point SPAR-11-50 from INNOTECH.

Single anchor point SPAR-15-125 from INNOTECH.

Compact single anchor point with movable anchorage eye – flexible, safe, easy to install. The EAP-SPAR-15-85 is a single anchor point for personal protective equipment against falls from a height, specially developed for applications with ...

The telescopic pole EAP-TEL-10 and the bracket EAP-TEL-20 are used in combination for all manhole access points in industry, civil engineering, mining and sewerage, as well as in all confined spaces where descent into a shaft and appropriate fall ...

The telescopic pole EAP-TEL-10 and the console EAP-TEL-20 are used in combination for all shaft entries in industry, in civil engineering, mining or sewerage, as well as in all confined spaces where descent into a shaft and a corresponding fall ...

End/corner post incl. fastening set on concrete.

End/corner post incl. fastening set on hollow-core slab.

End/corner post incl. fastening set on hollow-core slab.

End/corner post incl. fastening set on solid wood.

End/corner post incl. fastening set on solid wood.

End/corner post incl. fastening set for OSB.

End/corner post incl. fastening set for wood - rough formwork.

End/corner post incl. fastening sets for trapezoidal sheeting.

The FALZ-25 intermediate point from INNOTECH was developed for installation on standing seam roofs in the AIO lifeline system.

Universal point for standing seam roofs.

Guide bush for MFS.

Guide bush for MFS.

Threaded rod.

Drum unwinder for cable pulley Ø 150 - 700 mm.

Wood screw.

Wood screw.

Concrete screw

Fall arrest device.

The IND system from INNOTECH is a unique solution for industry. An interesting feature is the maximum field spacing of 30 m for fixed systems.

End lock attachment for IND-SEILSYSTEM

End lock attachment for IND-SEILSYSTEM.

End lock attachment for IND-SEILSYSTEM.

End lock fastening.

End lock set.

The IND slider from INNOTECH® is characterised by a resistance-free passage along the stainless steel cable. It is used as a mobile anchorage point for 1 person.

The AIO-GLEIT-22 from INNOTECH can be both attached and detached at any location on the IND lifeline system. It makes movement possible on curves as well as straight runs along the lifeline system.

Stainless steel cable tested for INNOTECH lifeline systems.

Intermediate bracket.

Inspection plate.

Thermal insulation cap for EAP-POINT and EAP-QUAD.

Thermal insulation cap for EAP-STABIL and AIO-STA.

Triple-lock carabiner.

The pre-assembled horizontal lifeline system KIT BOX, in practical reusable packaging, is outstandingly suited for rapid, simple, and flexible installation.

Large diameter washer.

Intermediate cable bracket.

The stable LIGHT fall-through protection from INNOTECH can be implemented in any desired dimensions, and is a robust solution for very varied types of skylights.

Fastening holder.

Fastening holder.

Beam clamp.

Screw carabiner.

The flexible LIGHT-FLEX collective fall-through protection from INNOTECH can be implemented in any desired dimensions, and is a robust solution for very varied types of skylights and strip lights.

Stiffening rail.

Stiffening rail.

Stiffening rail.

The flexible LIGHT-FLEX collective fall prevention system from INNOTECH can be implemented in any desired dimensions, and is a robust solution for very varied types of skylights and strip lights.

Fastening holder.

Fastening holder.

Fastening tube.

Wire Mesh.

Rating plate for skylight protection system.

Weight.

Lower cap for post.

Top cap for post.

Barrier chain.

Barrier chain.

Post.

The uncomplicated LIMIT solution from INNOTECH provides perfect protection from potential danger sources to people who move at height for their work.

Bore fastener.

CLAMP ON SIDE

PLUG-IN MODULE

NET

POST

LOCKING MODULE

SLIDE MODULE

PUSH-IN SLEEVE

RACK

PERFORATED ROD

CARRYING BAG

Torque spanner (4 to 20 Nm).

Lubricant for stainless steel thread.

Brush set Ø 12 mm - Ø 18 mm with blow-out.

Carbide hammer drill bit SDS-Plus

Sheet metal up to Dm 32 mm.

Compound mortar.

Torque spanner (10 to 100 Nm).

Rivet pliers.

Installation set for AIO lifeline systems.

Tube bending machine with flaring feature.

Cable shears.

Installation set for AIO lifeline systems.

POINT-15 universal support from INNOTECH.

The user-friendly BRAKE lanyard from INNOTECH was developed for use as a lanyard, temporary lifeline system and for workplace positioning.

For easy ascending on fixed ropes / cables from 8 to 13 mm.

Lightweight helmet (with chin strap) offering good comfort, good ventilation and an adjustment dial.

The foot loop is a practical aid for ascending ropes / cables, ideal for working at height, rescue operations or technical climbing applications. It is quick and easy to use and can be adjusted continuously thanks to the integrated sliding ...

This loop has been developed for professional use and impresses with maximum robustness and durability. The transparent protective hose offers optimum protection against external influences, while the largely sealed design prevents the ingress of ...

Lanyard, 470 mm, extension for safety harness (full body harness).

The seat can be combined with PSA-STRING-1-PRO and offers extreme hanging comfort when working on a rope.

Belt ascender.

Rope for industrial climbing tasks.

For the protection of lanyards or flexible anchorage lines of all diameters where there is a hazard from edges or rough substructures.

Self-braking descender device with all safety functions.

Slides up and down along the rope.

Shock absorber.

Tape sling.

Tool pouch with 2 carabiner hooks for attachment to the belt.

Tool holder with carabiner to secure tool from falling.

Loop for tool holder.

Rucksack to hold all industrial climbing material - every item has its own place - an infinite number of options for stowing and attaching equipment.

The Innotech LISATAG has an NFC chip and a QR code which enables the digital management of PPE products.

Y-lanyard.

Descender and rescue device with lifting function.

Tripod 2.2 m.

Descender device.

The passive rescue kit is used for rescuing injured persons from the safety harness.

Rescucender rope clamp.

Edge protection plate for rescue kit

Sheathed core rope for rescue kit.

Fall arrest device.

Fall arrest device.

Fall arrest device.

Fall arrest device.

Fall arrest device.

Triple-lock carabiner.

Ready-to-use reversible rescue kit for securing and descending an injured person

Storage cabinet for PPE, white.

PSA-SET consisting of: 1x PSA-STRING-1-BASIC, 1x PSA-BRAKE-005, 1x PSA-KARI-1

PSA-SET consisting of: 1x each PSA-STRING-1-COMFORT, PSA- STRING-2, PSA-BRAKE-010, PSA-TAPE-80, PSA-KARI-1, and 2x KA- TL-10-362-A2.

The SHARK lanyard from INNOTECH has been tested for horizontal use, and is a winner because of the versatility of its functions

By combining the sternal with the dorsal attachment point, it is suitable for all applications where fall protection is required.

By combining the sternal with the dorsal attachment point, it is suitable for all applications where fall protection is required.

Thanks to combination of front and rear fall-arrest eyelets, suitable for all applications where protection against falling is essential.

The harness for rope access STRING-1-PRO has been designed for hanging in a rope for long periods.

Shoulder pad for additional wearing comfort of the PSA-STRING-1 safety harness.

The PSA-STRING-WORKAIR is used wherever activities have to be performed in a fall-risk area, and it is not practical to provide protection by means of a safety harness. This is especially the case when comparatively modest fall heights (1 to 3 ...

Band sling.

The QUAD-11 universal support from INNOTECH can be used as a single anchor point or as an intermediate support in the AIO lifeline system.

The QUAD-13 universal post from INNOTECH can be used as a single anchor point and also as a system post in the AIO lifeline system.

End/corner point in the AIO lifeline system.

System post held by superimposed load for rail system and anchorage point on green and gravel roofs.

Ladder securing device for the flat roof for attachment to the parapet cover plate.Serves to fix a leaning ladder to prevent it from tipping sideways and backwards.

Ladder securing for the flat roof for attachment to the parapet (wooden or reinforced concrete construction).Serves to fix a leaning ladder to prevent it from tipping sideways and backwards.

The ladder securing device for the flat roof for attachment to the sandwich facade.Serves to fix a leaning ladder to prevent it from tipping sideways and backwards.

Ladder securing for the pitched roof for attachment to the rafters.Serves to fix a leaning ladder to prevent it from tipping sideways and backwards.

The SAND-01 from INNOTECH has a low system height, and can therefore be installed easily so that it is architecturally inconspicuous.

Compact universal anchor point for sandwich roofs – flexible, safe, easy to install. The SAND-02-A2 is a universal anchor point for rope safety systems, specially developed for installation on sandwich panel roofs from various manufacturers. ...

The SAND-13 from INNOTECH has a low system structure and can therefore be installed inconspicuously and easily.

End point, corner point, and intermediate point SAND-31-A2 for Peneder arch roof.

Twist drill.

SDA-35 from INNOTECH is ideal as a single Anchorage point for sloped roofs and steep roofs.

The SDH-31 safety roof hook from INNOTECH requires only modestly dimensioned wood, and therefore adapts optimally to the roof conditions.

The SDH-31 safety roof hook from INNOTECH requires only modestly dimensioned wood, and therefore adapts optimally to the roof conditions.

The SDH-INDUSTRY-31 safety roof hook from INNOTECH is characterised by its especially high intrinsic stability and variable support on all crimp heights.

The SDH-INDUSTRY-31-CU safety roof hook from INNOTECH is characterised by its especially high intrinsic stability and variable support on all crimp heights.

Shock absorber for lifeline systems.

Shock absorber for lifeline systems.

Hex nut.

Hex bolt M10.

Hex bolt M12.

Hex bolt M16.

Lock nut.

Fastening set for end lock set on AEROCOMPACT SN 2 / SN2+.

Fastening set for end lock set on AEROCOMPACT SN 2 / SN2+.

Fastening set for cable intermediate bracket on AEROCOMPACT SN 2 / SN2+.

Fastening set for EDLE / SZH / EAP on AEROCOMPACT SN 2 / SN2+.

Fastening set for EDLE / SZH / EAP on AEROCOMPACT SN 2 / SN2+.

Extension for base rail on AEROCOMPACT SN 2 / SN2+.

Extension for base rail on AEROCOMPACT SN 2 / SN2+.

Single anchor point on PV UKAEROCOMPACT SN 2 / SN2+.

Single anchor point on PV UK AEROCOMPACT SN 2 / SN2+.

Fastening set for Taurus on AEROCOMPACT SN 2 / SN2+.

Fastening set for Taurus on AEROCOMPACT SN 2 / SN2+.

Fastening set for Taurus on AEROCOMPACT SN 2 / SN2+.

Rating plate for AIO on AEROCOMPACT.

Rating plate for TAURUS on AEROCOMPACT.

Connector for sliding base on AEROCOMPACT SN 2 / SN2+.

Fastening set for end lock set onK2 SYSTEMS BasicRail.

Fastening set for end lock set on K2 SYSTEMS BasicRail.

Fastening set for end lock set on K2 SYSTEMS BasicRail.

Fastening set for end lock set on K2 SYSTEMS BasicRail.

Fastening set for intermediate bracket on K2 SYSTEMS BasicRail.

Fastening set for EDLE / SZH / EAP on K2 SYSTEMS BasicRail.

Fastening set for EDLE / SZH / EAP on K2 SYSTEMS BasicRail.

Extension set for K2 SYSTEMS BasicRail.

Fastening set for cable intermediate bracket on K2 SYSTEMS BasicRail.

Fastening set for EDLE / SZH / EAP on K2 SYSTEMS BasicRail.

Fastening set for EDLE / SZH / EAP on K2 SYSTEMS BasicRail.

Extension set on K2 SYSTEMS BasicRail.

Single anchor point on PV UK K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

Fastening set for Taurus on K2 SYSTEMS BasicRail.

All-In-One rating plate, passable.

TAURUS rating plate, horizontal for K2 SYSTEMS.

Fastening set for end lock set on NOVOTEGRA flat roof 2 base rail.

Fastening set for cable intermediate bracket on NOVOTEGRA flat roof 2 base rail.

Single anchor point on PV UK NOVOTEGRA flat roof 2 base rail.

Fastening set for Taurus on NOVOTEGRA flat roof 2 base rail.

Fastening set for Taurus on NOVOTEGRA flat roof 2 base rail.

Rating plate for AIO on NOVOTEGRA flat roof 2 base rail.

Rating plate for TAURUS on NOVOTEGRA flat roof 2 base rail.

The STA-10 system support has a very high basic stability and offers a wide range of possible uses on almost all surfaces

The STA-11 system support has a very high basic stability and offers a wide range of possible applications on almost all substrates.

The STA-12 system support has a very high basic stability and offers a wide range of applications on almost all surfaces.

The STA-16 system post has a very high base stability and provides a multiplicity of implementation options on almost all substructures.

The STA-17 system support has a very high basic stability and offers a wide range of applications on almost all substrates.

SYST, the robust system roof clamp from INNOTECH, has high intrinsic stability and can be used with great versatility on the most varied system roofs.

SYST, the robust system roof clamp from INNOTECH, has high intrinsic stability and can be used with great versatility on the most varied system roofs.

The SYST-20 anchorage point for trapezoidal sheeting from INNOTECH is used as an end or corner point in a horizontal lifeline system, and also as an intermediate bracket.

The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.

The INDUSTRY-31 crimped clamp from INNOTECH is characterised by its especially high intrinsic stability. Because of the variable post, all crimp heights are covered.

Bracing of the vertical Taurus exit.

Anchorage on concrete for rail systems.

Holding bracket for TAURUS-STEP-10-ST.

Holding bracket for TAURUS-STEP-20/50-ST.

RAIL FASTENER that can be installed in curves/arcs.

Anchorage on steel construction for rail systems.

Anchorage on façade for rail systems.

Fastening angle for rail systems.

Fastening angle for rail systems.

Anchorage on wood for rail systems.

The TAURUS-BEF-42 was specially developed for fastening the TAURUS-HORIZONTAL rail system to target roofs in steep roof areas. The height-adjustable fastening allows the TAURUS rail system to be installed securely and close to the roof directly on ...

Anchorage for ladders.

Bending device for Taurus rail.

Turntable gate.

Rail end closure, fixed, for rail systems.

Rail end closure, variable, for rail systems.

Entry plate for safe access to the rail slider.

The TAURUS GLEIT-A-31 from INNOTECH has been developed as a rail slider for horizontal and vertical use, and includes a shock-absorbing element.

The TAURUS GLEIT-H-11 from INNOTECH has been developed as a rail slider for horizontal use.

Das aus Aluminiumschienen bestehende System zur Sicherung von Personen an absturzgefährdeten Bereichen lässt sich unabhängig von der Struktur eines Bauwerks fix an diversen Bauteilen befestigen. Aufgrund der Anpassbarkeit des Systems stellen neben ...

Das aus Aluminiumschienen bestehende System zur Sicherung von Personen an absturzgefährdeten Bereichen lässt sich unabhängig von der Struktur eines Bauwerks fix an diversen Bauteilen befestigen. Aufgrund der Anpassbarkeit des Systems stellen neben ...

The S-111 rail slider was specially developed for uninterrupted fall protection systems in horizontal applications in the TAURUS system. It scores particularly well on facades with its excellent running properties – even under load. Thanks ...

Rail slider for vertical use.

Das aus Aluminiumschienen bestehende System zur Sicherung von Personen an absturzgefährdeten Bereichen lässt sich unabhängig von der Struktur eines Bauwerks fix an diversen Bauteilen befestigen. Aufgrund der Anpassbarkeit des Systems stellen neben ...

Rail, straight.

Rail curve, horizontal.

Outer rail bend 90 degrees.

Inner rail bend 90 degrees.

Rail with torsion.

Vertical rail system with integrated ladder rungs.

Vertical rail system with integrated ladder rungs.

Vertical rail system with integrated ladder rungs.